关注我们
Defoamer REOKO 751
Polyether-based defoamer, with temperature resistance exceeding 100℃, is suitable for low-temperature flash distillation systems in seawater desalination. It exhibits excellent dispersibility in water, requires minimal dosage, and provides rapid defoaming efficiency along with long-lasting anti-foaming effects. Furthermore,it is free from heavy metal ions and environmentally friendly.
Classification:
sales@renatur.cn
Introduction
Polyether-based defoamer, with temperature resistance exceeding 100℃, is suitable for low-temperature flash distillation systems in seawater desalination. It exhibits excellent dispersibility in water, requires minimal dosage, and provides rapid defoaming efficiency along with long-lasting anti-foaming effects. Furthermore,it is free from heavy metal ions and environmentally friendly.
I.Product Features
1. A silicone-free, polyether-based defoamer.
2. Highly effective defoaming and foam suppression formula with excellent high-temperature stability.
3. Water-dilutable, suitable for foam control in various pH conditions, designed for aqueous systems.
4. Allows precise control through micro-dosing.
5. Outstanding stability, heat-resistant, and resistant to emulsion breakdown.
6. Easy to disperse, either as a concentrated product or when diluted, maintaining stable performance even under strong alkaline conditions.
7. Exceptional defoaming and foam suppression performance.
8. Suitable for high-temperature systems such as steelmaking, evaporation crystallization, industrial cleaning, leachate high-temperature evaporation treatment, and wastewater treatment.
II. Product Specifications
◆ Appearance: Colorless to pale yellow liquid
◆ PH Value: Original Fluid, 6.0 - 9.0
◆ Density (@25℃): 1.00±0.05g/cm³
◆ Ionic Type: Non-ionic
◆ Recommended Diluent: Cold water
III. Product Usage
REOKO 751 defoamer delivers excellent foam control even at very low concentrations. For on-site application, it is recommended to start with a higher dosage and gradually reduce it until the desired foam control level is achieved. The suggested usage concentration is 1-100 ppm.
Addition Method:
For optimal foam control, ensure the defoamer is fully dispersed in the foaming medium. Refer to the following recommendations for best results:
◇ Can be added as-is, either through timed and quantified automatic dosing or manual addition.
◇ Can be diluted with water before addition (follow the same dosing method as above).
◇ If possible, inject the defoamer directly at the foam generation point in the system for rapid defoaming.
◇ For opened packaging or diluted defoamer, reseal tightly after use to prevent moisture evaporation.
IV. Packaging
REOKO 751 is factory-packed in IBC ton barrels or according to customer requirements, and is transported as non-hazardous general goods. Please store it sealed in a ventilated, light-shielded, and room temperature environment. The shelf life is 12 months.
This product will freeze below 0℃. If frozen, please dissolve this product before use. The effect will not be affected, but stirring may be necessary. Please avoid storing this product at temperatures above 49℃.
Welcome your message consultation
Through the above introduction, I believe you have enough to know us, and rest assured to cooperate with us, quickly leave your information, we will express samples or photo album to you!
CORE BUSINESS
Tel
+86-411-84793819
sales@renatur.cn
Harbin Road, Dalian Economic and Technological Development Zone, Liaoning Province
CONTACT
Tel: +86-411-84793819
E-mail: sales@renatur.cn
Harbin Road, Dalian Economic and Technological Development Zone, Liaoning Province
MESSAGE
©2025 Renatur Environmental Protection Technology (Dalian) Co., Ltd. Powered by：CEglobal